rf0 1131 , rev . a ( 6/24 /13 ) ?201 3 microsemi cor poration page 1 of 7 15kpa 17 a e3 C 15 kpa28 0 ca e3 compliant 15,000 watt transient v oltage s uppressor (tvs) p rotection device description this device clamps dangerous high - voltage short - term transients such as those produced by the secondary effects of lightning strikes, providing circuit protection to several class levels in the iec61000 -4- 5 specification. clamping time is virtually instantaneous. it also provides protection from transients caused by inductive load dumps, induced rfi, and esd, prov iding protection to iec61000 -4- 2 and -4- 4. p600 package important: for the latest information, visit our website http://www.microsemi.com . featu res ? available in both unidirectional and bidirectional configurations. ? 5% working voltage tolerance . ? moisture classification is level 1 with no dry pack required per ipc/jedec j - std - 020b. ? rohs compliant (2002/95/ec), msl level 1 (j - std - 020). applicatio ns / benefits ? protection from transients caused by lightning strikes, switching transients, rfi, and esd . ? protection from esd, and eft per iec 61000 -4- 2 and iec 61000 -4- 4. ? protection from the secondary effects of lightning per iec61000 -4- 5. maximum ratings @ 25 oc unless otherwise noted parameters/test conditions symbol value unit junction and storage temperature t j and t stg -5 5 to +1 75 o c thermal resistance, junction to lead @ 3/8 inch (10 mm) lead length from body r ? jl 8.0 o c/w thermal resistance, junction to ambient r ? ja 77.5 o c/w non r epetitive p eak f orward s urge current (1) i fsm 400 a rated average power dissipation @ t l = 7 5 oc , (0.375 inch ( 9.5 mm) from body ) (2) p m(av) 8.0 w peak pulse p ower d issipation with a 10/1000 s waveform ( see f ig ure 1 ) p pp 15000 w peak p ulse c urrent with a 10/1000 s waveform (3) i pp see electrical table a solder temperature @ 10 s 260 o c notes : 1. for unidirectional devices only . measured on 8.3 ms single half sine - wave or equivalent square wave, duty cycle = 4 pulses per minute maximum . also see figure 6 . 2. mounted as shown in f igure 5 . 3. non - repetitive current pulse, per f igure 3 and derated above t a = 25oc per f igure 2 . msc C lawrence 6 lake street, lawrence, ma 01841 1- 800 - 446 - 1158 or (978) 620 - 2600 fax: (978) 689 - 0803 msc C ireland gort road business park, ennis, co. clare, ireland tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: www.microsemi.com downloaded from: http:///
rf0 1131 , rev . a ( 6/24 /13 ) ?201 3 microsemi cor poration page 2 of 7 15kpa 17 a e3 C 15 kpa28 0 ca e3 mechanical and packaging ? case: e poxy body meet s ul94v - 0. ? terminals: matte -t in plating , fully rohs c ompliant . s olderable per mil - std - 750, method 2026 . ? marking: manufacturer id, date code and part number. ? polarity: for unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal tvs operation . ? tape & reel option: standard per eia - 296 (add tr suffix to part number). consult factory for quantities. ? wei ght: approximately 0.07 ounce (2.0 grams) . ? see p ackage d imensions on last page. part nomenclature 15 k p a 17 c a e3 peak pulse power kilowatt rating encapsulated plastic package axial - leaded device stand- off voltage rating (see electrical characteristics table) rohs compliance 5% voltage tolerance polarity c = bi - directional blank = unidirectional symbols & definitions symbol definition v( br ) temperature coefficient of breakdown voltage: the change in breakdown voltage divided by the change in temperature that caused it expressed in %/ c or mv/ c. v wm wo rking s tandoff v oltage: the maximum - rated value of dc or repetitive peak positive cath ode - to - anode voltage that may be continuously applied over the standard operating temperature. p pp peak pulse power. the rated random recurring peak impulse power or rated nonrepetitive peak impulse pow er. the impulse power is the maximum - rated value of the product of i pp and v c . v ( br) breakdown voltage: the voltage across the device at a specified current i (br) in the breakdown region. i d standby current: the current through the device at rated stand - off voltage. i pp peak impulse current: the maximum rated random recurring peak impulse current or nonrepetiti ve peak impulse current that may be applied to a device. a random recurring or nonrepetitive transient current is usual ly due to an external cause, and it is assumed that its effect will have completely disappeared b efore the next transient arrives. v c clamping voltage: the voltage across the device in a region of low differential resistance during the application of an impulse current (i pp ) for a specified waveform. downloaded from: http:///
rf0 1131 , rev . a ( 6/24 /13 ) ?201 3 microsemi cor poration page 3 of 7 15kpa 17 a e3 C 15 kpa28 0 ca e3 electrical characteris tics @ 25 oc de vi ce breakdown voltage (2) , v (br) v (br) @ i (br) (v olts ) test current i (br) (ma) stand - off voltage v wm (v olts ) maximum standby current (4) i d @ v wm (a) maximum peak pulse current (3) i pp (a) maximum clamping voltage v c @ i pp (v olts ) maximum tempe rature coefficient v( br ) (%/ c) min m ax 15k pa17ae3 / 1 5k pa17cae3 18.99 20.79 50 17 5000 515.4 29.3 0.1 15k pa18ae3 / 1 5k pa18cae3 20.11 22.01 50 18 5000 488.7 30.9 0.1 15k pa20ae3 / 1 5k pa20cae3 22.34 24.46 20 20 1500 440.2 34.3 0.1 15k pa22ae3 / 1 5k pa22cae3 24.57 2 6.91 10 22 500 407.0 37.1 0.1 15k pa24ae3 / 1 5k pa24cae3 26.81 29.35 5 24 150 371.0 40.7 0.1 15k pa26ae3 / 1 5k pa26cae3 29.04 31.80 5 26 50 343.2 44.0 0.1 15k pa28ae3 / 1 5k pa28cae3 31.28 34.24 5 28 25 317.9 47.5 0.1 15k pa30ae3 / 1 5k pa30cae3 33.51 36.70 5 30 15 297.8 50.7 0.1 15k pa33ae3 / 1 5k pa33cae3 36.90 40.40 5 33 2 276.1 54.7 0.1 15k pa36ae3 / 1 5k pa36cae3 40.20 44.00 5 36 2 252.5 59.8 0.1 15k pa40ae3 / 1 5k pa40cae3 44.70 48.90 5 40 2 229.5 65.8 0.1 15k pa43ae3 / 1 5k pa43cae3 48.00 52.60 5 43 2 216.3 69.8 0 .1 15k pa45ae3 / 1 5k pa45cae3 50.30 55.00 5 45 2 207.4 72.8 0.1 15k pa48ae3 / 1 5k pa48cae3 53.60 58.70 5 48 2 194.3 77.7 0.1 15k pa51ae3 / 1 5k pa51cae3 57.00 62.40 5 51 2 182.1 82.9 0.1 15k pa54ae3 / 1 5k pa54cae3 60.30 66.00 5 54 2 172.2 87.7 0.1 15k pa58ae3 / 1 5k pa58cae3 64.80 70.90 5 58 2 161.0 93.8 0.1 15k pa60ae3 / 1 5k pa60cae3 67.00 73.40 5 60 2 155.0 97.4 0.1 15k pa64ae3 / 1 5k pa64cae3 71.50 78.30 5 64 2 144.9 104.2 0.1 15k pa70ae3 / 1 5k pa70cae3 78.20 85.60 5 70 2 132.9 113.6 0.1 15k pa75ae3 / 1 5k pa75cae3 8 3.80 91.70 5 75 2 123.8 122.0 0.1 15k pa78ae3 / 1 5k pa78cae3 87.10 95.40 5 78 2 119.7 126.1 0.1 15k pa85ae3 / 1 5k pa85cae3 94.90 104.00 5 85 2 109.7 137.6 0.1 15k pa90ae3 / 1 5k pa90cae3 100.50 110.10 5 90 2 103.7 145.6 0.1 15k pa 10 0ae3 / 15k pa 10 0ca e3 111.70 1 22.30 5 100 2 93.6 161.3 0.1 15k pa 11 0ae3 / 15k pa 11 0ca e3 122.90 134.50 5 110 2 84.5 178.6 0.1 15k pa 12 0ae3 / 15k pa 12 0ca e3 134.00 146.80 5 120 2 78.5 192.3 0.1 15k pa 13 0ae3 / 15k pa 13 0ca e3 145.20 159.00 5 130 2 72.5 208.3 0.1 15k pa 15 0ae3 / 15k pa 15 0ca e3 167. 60 183.50 5 150 2 62.4 241.9 0.1 15k pa 16 0ae3 / 15k pa 16 0ca e3 178.70 195.70 5 160 2 58.4 258.6 0.1 15k pa 17 0ae3 / 15k pa 17 0ca e3 189.90 207.90 5 170 2 55.4 272.7 0.1 15k pa 18 0ae3 / 15k pa 18 0ca e3 201.10 220.10 5 180 2 52.3 288.5 0.1 15k pa 20 0ae3 / 15k pa 20 0ca e3 223.40 244.60 5 200 2 47.3 319.1 0.1 15 kpa 22 0ae3 / 15k pa 22 0ca e3 245.70 269.10 5 220 2 35.2 356.0 0.1 15 kpa 24 0ae3 / 15k pa 24 0ca e3 268.10 293.50 5 240 2 39.3 384.6 0.1 15 kpa 26 0ae3 / 15k pa 26 0ca e3 290.40 318.00 5 260 2 36.2 416.7 0.1 15 kpa 28 0ae3 / 15k pa 28 0ca e3 312.80 342.40 5 280 2 33.2 454.5 0.1 note s: (1) all ratings at 25 oc unless specified otherwise . (2) v ( br ) measured after i (br) applied for 300 s, i ( br ) = square wave pulse or equivalent . (3) surge current waveform per f igure 3 and derated per f igure 2 . (4) for bidrectional types with v wm of 30 volts and less, the i d limit is doubled . downloaded from: http:///
rf0 1131 , rev . a ( 6/24 /13 ) ?201 3 microsemi cor poration page 4 of 7 15kpa 17 a e3 C 15 kpa28 0 ca e3 graphs t d C pulse width ( s ec.) figure 1 peak pulse power rating curve t a ambient temperature ( c) figure 2 pulse derating curve p pp C peak pulse power (kw) peak pulse power (p pp ) or current (l pp ) der a ting in percentage% downloaded from: http:///
rf0 1131 , rev . a ( 6/24 /13 ) ?201 3 microsemi cor poration page 5 of 7 15kpa 17 a e3 C 15 kpa28 0 ca e3 graphs (continued) t C time C ms test waveform parameters: tr=10 s, tp=1000 s figure 3 pulse waveform for 10/1000 exponential surge v (br) C reverse breakdown voltage (v) figure 4 typical junc tion capacitance pulse current in percent of i pp c t , total capacitance (p f) downloaded from: http:///
rf0 1131 , rev . a ( 6/24 /13 ) ?201 3 microsemi cor poration page 6 of 7 15kpa 17 a e3 C 15 kpa28 0 ca e3 graphs (continued) t l C lead temperature (c) figure 5 steady state power derating curve number of cycles at 60 hz figure 6 maximum non - repetitive forward surge current (unidirectional devices only) p d steady state power dissipation (w) i fsm peak forward surge current (a) downloaded from: http:///
rf0 1131 , rev . a ( 6/24 /13 ) ?201 3 microsemi cor poration page 7 of 7 15kpa 17 a e3 C 15 kpa28 0 ca e3 package dimensions dimensions dim inch millimeters min max min max ll 0.750 - 19.05 - bl 0.340 0.360 8.645 9.135 bd 0.340 0.360 8.645 9.135 ld 0.0 47 0.053 1.194 1.346 downloaded from: http:///
|
